Simple cylinder grasp #robot # hand #robothand #robotics #3dprinting
Not bad considering that all the servos are slaved to just a pair of joysticks and yet to apply any compliant or grippy layer.
Nice to have the option to shape the grip with the separate actuation of the knuckle and the rest of the finger dof.
Made entirely by #3dprinting with additional total cost of components required for the hand starting at around $300 USD.
The stl files to print the hand and forearm are on github:
The #cad for the arm and hand is freely and publically available down to a parasolid level at:
The forearm and hand can operate as a stand-alone unit allowing unlimited axial rotation for rotational tasks like scrubbing.
Some notes on printing:
Designed and tested for high speed printing using a diameter nozzle and layer thickness except for the tendon spools (three type of Tendon_Spool_01 supplied, ymmv) and tendon hanger which benefit from printing at layer thickness or better.
Test printed in CF nylon with nozzle and layer for structural components.
To finish 3d prints to a high standard requires a fine sandpaper or emery board.
Diamond coated steel nail files are a handy tool:
Though my favourite diamond file is actually intended for maintaining whetstones, just a nice big expanse of diamond to use :-)
- Amazon UK:
- Amazon FR:
- Amazon US:
Additional components required are listed below.
Please consider buying via the Amazon links where available to help fund the robot development.
The biggest cost item are the servos:
16 slim microservos like the Emax ES3301 (approx $6.6) are needed for a total of approx 100 - 200 bucks.
The hand in the video uses Emax ES3302 but any slim micro servo that fits inside the envelope of 23.2*9.2*24.1 will do.
Emax themselves make four variants at this size with plastic or metal gears and using either digital or analog control technology.
ES3301 (approx $6.6)
ES3302 (approx $9.2)
ES3351 (approx $8.5)
ES3352 (approx $12)
Official website:
2 micro servos needed for wrist flexion and extension (required).
Feetech SCS2332 - are recommended.
These are serial bus driven servos over allowing a greater range of controlled rotation.
They cost around 35 bucks each plus delivery obvs.
If you prefer to use a traditional servo for simplicity they can be substituted by any servo that fits inside the envelope 23.2*12.1*.
The trade off is the reduction of the powered range of motion of the wrist to about half.
1 standard servo needed for axial wrist rotation (optional)
Feetech SCS15 - or any servo that fits inside the envelope 40*20*. Reduces powered range of motion to about half and the loss of a continuous rotation option.
The rest of the components are relatively inexpensive:
2mm diameter steel pins - alternatively cut lengths from a wire coat hanger or in Europe order direct from
Otherwise kits are available on Amazon:
UK:
FR:
US:
M2 screw and washer kits, or also in Europe from
UK:
FR:
US:
M2 brass threaded inserts M2 * 4mm long *
Note that the type required has a plain section between the knurled ends to allow attachment of the tendon in the fingertip.
UK:
FR:
US:
Kite or fishing line for tendons and ligaments - Sufix 832 is the best I know of for longevity, the 80lbs breaking strength is stiff enough to thread easily and most readily available in the US.
UK:
FR:
US:
Ball Bearings 6*10*3 - Need 50 for a hand, packs of 10 available which are enough for the sample finger.
UK:
FR:
US:
Ball Bearings 2*6*3 or 2*6*2.5 - Need 6 for a wrist.
UK:
FR:
US:
Ball Bearings 15*21*4 - Need 4 for a wrist.
UK:
FR:
US:
ptfe tubing 2mm OD 1mm ID, sold for 3dprinters.
UK:
FR:
US:
3 views
190
53
2 months ago 00:00:30 1
Meline Popular Science Series ---- How to apply the stencil? #MelineGroup
2 months ago 00:04:49 1
New 2024 Honda Freed - Compact Spacious Family MPV
2 months ago 00:08:31 1
Jaw-dropping Science Toys/Gadgets 1
2 months ago 00:02:08 1
Engine Lathe Machine CD6250BX1000:A Better Choice of Metal Manual Lathe
2 months ago 00:02:21 2
1954 Chevrolet Bel Air Gateway Classic Cars Fort Lauderdale Stock #973
2 months ago 00:05:01 1
Watch And Listen How A Subaru Engine Rod Knock Vs Piston Slap Sounds Like
2 months ago 00:06:09 1
트리머를 이용한 메쉬 모양 만들기 / 목공 DIY
3 months ago 00:12:04 1
HOMEMADE MACHINES, FUN TECHNICS AND FASCINATING TECHNOLOGY AND INVENTIONS ✦ 260 ✦ Lucky Tech
3 months ago 00:18:49 1
Getting started with QUICKSURFACE 2024
3 months ago 00:08:55 1
DIY camping table
3 months ago 00:15:15 1
Топ 10 Самых Мощных Новых Мотоциклов с Рядной Двойкой (2024) !
4 months ago 00:09:43 1
FIRST LOOK: Ferrari 12Cilindri – Silly Name, Crazy 820bhp V12!
4 months ago 00:27:32 1
How to Create URDF and Launch Files in ROS2- Minimal Working Example
4 months ago 00:11:09 1
A simple & powerful exercise for sketching people | Draw stick figures in a whole new way
4 months ago 00:02:37 4
Photoshop Tutorial |How To Convert An Image To Bitmap Effect?Photoshop tutorial for beginners.
4 months ago 00:07:05 1
Вращение одних объектов, вокруг другого объекта в After Effects
4 months ago 00:20:31 1
Spain is Living in 2050? Revolutionary 1 Stroke INNengine Analyzed
4 months ago 00:03:57 4
135972 / 1958 BMW Isetta 300
4 months ago 00:17:14 1
Rotary Valves Make Normal Valves Look Silly - Why Aren’t We Using Them?
5 months ago 01:53:41 35
Steampunk Revolver Complete Modeling Tutorial in Blender 3.4