DIY RC Robot WALL-E with Foam and Plywood

I’ve plan to build life size RC WALL-E from 5 years ago (2016), but never happen until now. This build needs about a month to finish, the main material is, actually it made out of 50:50 depron foam and plywood, also using EVA foam on some parts. This RC Robot right arm can move or rotate up and down, can also twist and has a robot gripper hand, so he can be use to pick up trash, while the left arm unusable just glued to his body. There’s a ramp door on the front that can be open and close with RC to deposit the trash. Maintenance door is on the back. I also made a simple lunch box for him. After it finish, it looks cute but surprisingly big, maybe a bit bigger than the real size, maybe about 105-110 %. I have problem on his track, the track is made out of plywood and EVA foam and that’s where the problem begin. Because the soft EVA foam it has more grip thus makes the robot very hard to turn on rough ground like concrete or asphalt, but it has no problem turning or pivoting on smooth surface like ceramic tiles. Because I’m running out of time, I missed adding the sound system, my plan is just using portable speaker and mp3 player for the sound, or just by using Bluetooth speaker. SUBSCRIBE and Like to support this channel #rcrobot #depron #walle You can download the plans here : SOON - STILL IN PARTS NUMBERING STEP Join this channel to get access to perks: Playlist : 00:00 Opening 00:35 Pickup Trash 01:16 Making Gear and Track Base 04:34 Electronics 05:20 Drive Train Test 06:00 Pickup Trash # 2 06:34 Track Set Detail (Leg) 06:45 Building WALL-E Body 07:31 Installing FPV Camera 08:23 Making WALL-E Neck and Head 12:31 WALL-E Meets Trash Collector Truck 13:29 Applying paint and Finishing 16:09 WALL-E Going Out to Buy Burger 17:30 Review and Next Episode Announcement Specs : 1. Height 106 cm / 41.7 inches 2. Width 91 cm / 35.8 inches Electronics - 2X Hobbyking X-Car 45A brushed RC car ESC - 2X Henglong Plastic RC Tank gearbox - 4X Standard Servo - 2X 360 Continuous Servo (Standard Size) - 2S Lipo Battery 5200 mAh FPV : - Runcam 2 - VTX Aomway 600mw 5.8 ghz with spironet antenna - VRX RC832 with TV output cable and spironet antenna - TV Materials : 1. 5mm 3mm Foamboard/ Depron/ Polyfoam 2. 3mm Plywood 3. Mica Plastic 4. hot glue, UHU glue, CA glue 5. Oracal Vinyl Stickers (3 meters)