Huben K1 version 2 - disassembly

A very long and boring but detailed disassembly video of Huben K1 v2 where I also discuss fine tuning you can make on the gun and explain points of leaks and how to detect them. Timestamps: The most important disassembly 0:00 until 17:00 How to reassembly the barrel and align the magazine probably 17:00 until 24:00 How to improve trigger first and second stage 24:00 to 31:00 he explains why he has not taken the action block apart so far 31:00 to 32:00 Explanation how to make the safety harder or lighter to configure 32:00 to 33:00 he explains how the magazine seal is working in the gun and why it is a good design even with Revolver like gap 33:00 to 35:00 Possible leak with the magazine and how to fix it in theory 35:00 to 37:00 Explanation how the magazine is working with the pin to set the stage for the next round and how the action is working several other explanations in this as well like how to remove the plastic part that makes sure no pellets can fall out from behind the magazine where the pe