ADVANCED Electroplating 3D Prints

For improve playback, use the chrome extension Moovly High Definition for desktop and watch video at high speed with a resolution of 1080p

I’m showing you how to advance in electroplating/electroforming 3D Prints with different matals. Using the positiv photoresist masking method. I used a PLA Print of a Mandalorian Beskar Stell Ingot Model. This is about #DIY #Plating #3dprints. Chapters 00:00 Introduction 00:25 Creating the 3D Print 01:42 Bath Electroplating with copper Brush plating Palladium 02:43 Apply the Positive Photoresist 03:26 Sodium Hydroxide Devoloper Liquid 03:48 Expose 3D print to UV Light 04:38 Electroplate Pattern 05:30 Conclusion For the Conductivity I used * Tiffoo Conductive Copper Paint ! Make sure that ...it can be used with your copper electrolyte. For the galvanic bath: * a container * copper electrolyte (sour) * one or two copper anodes * banana plug & alligator clips For the galvanic pen plating: * Palladium Electrolyte * Chrome Electrolyte * Graphite Anode You may need: * Degreaser * Distilled water Have fun.

1 view